Contact Advantech Search Shopping list
  1.  
  2. inquiry.intercon@advantech.com.tw
  3. Login
Order By Part Number
Home CompactPCI Platforms CompactPCI CPU Boards

CompactPCI CPU Boards

These high-performance 6U CPU boards are designed to meet mission critical requirements for telecom, medical, and broader industrial markets. They feature the latest Intel® processor technology with exceptional I/O expandability for graphics, networking and storage.
Results per page 9 18 | Sort by Price Highest / Lowest
Page 1 of 2
MIC-3392A2-M2E
COM6U CompactPCI® Intel® Dual Core Processor Blade rev.2 (w/2GB, 1PMC)
  1. Supports Intel® Core™2 Duo processor
  2. Intel® 945GME chipset supports 533/667 MHz FSB
  3. Up to 3 GB (DDR2 533/667) memory with SODIMM expansion
  4. Comprehensive I/O capability, dual Gigabit Ethernet, SATA, CompactFlash
  5. One 64-bit/66 MHz PMC expansion slot, and optional second 64-bit/66 MHz PMC expansion slot
  6. PICMG 2.16, R1.0 packet switching backplane specification compliant
  7. PICMG 2.9, R1.0 IPMI specification compliant
  8. PICMG 2.1, R2.0 hot-swap specification compliant
  9. Selectable System/Peripheral mode

$2,348.08

Compare More
MIC-3392MILS-P2E
6U CompactPCI® Intel® Core™2 Duo Rugged Processor Blade
  1. Supports Intel® Core™ Duo or Core™2 Duo Ultra Low Voltage mobile processor
  2. Intel® 945GME chipset supports 533/667 MHz FSB
  3. Up to 3 GB (DDR2 533/667) SODIMM memory
  4. Conduction cooled with ANSI/VITA30.1-2002
  5. Pre-heat circuitry for cold-booting in low temperature
  6. 4 x GbE ports, 2 x USB 2.0, 2 x DVI-I ports, and 1 x COM interface to Transition Module
  7. Optional 1 x VGA port and two USB to front panel
  8. PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2

$3,857.28

Compare More
MIC-3395A1-M4E
6U CompactPCI® 2nd and 3rd Generation Intel® Core i7 Processor Blade
  1. 3rd Generation Intel® 2655LE Core™ i7 Processor
  2. Intel QM67 PCH with embedded graphics (dual independent display)
  3. Up to 16 GB (DDR3 1066/1333/1600) ECC memory
  4. Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket
  5. Integrated on-board 2KB NVRAM and min. 8GB flash (optional)
  6. TPM
  7. Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM)
  8. Six GbE ports for PICMG 2.16
  9. PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant

$2,337.18

Compare More
MIC-3395A2-M4E
6U CompactPCI® 2nd and 3rd Generation Intel® Core i7 Processor Blade with BMC
  1. 3rd Generation Intel® 2655LE Core™ i7 Processor
  2. Intel QM67 PCH with embedded graphics (dual independent display)
  3. Up to 16 GB (DDR3 1066/1333/1600) ECC memory
  4. Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket
  5. Integrated on-board 2KB NVRAM and min. 8GB flash (optional)
  6. IPMI v2.0 compliant BMC & TPM
  7. Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM)
  8. Six GbE ports for PICMG 2.16
  9. PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant

$2,367.29

Compare More
MIC-3395C1-M4E
6U CompactPCI® 2nd Generation Intel® Core i7 Processor Blade with ECC Support
  1. 2nd Generation Intel® Core™ i7 2715QE processor with Intel QM67 PCH with embedded graphics
  2. Up to 16 GB (DDR3 1066/1333/1600) ECC memory (max 8GB on-board socket SO-UDIMM x1, max 8GB)
  3. Supports dual independent display
  4. Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket
  5. Integrate on-board 2KB NVRAM and min. 8GB flash (optional)
  6. TPM support
  7. Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM)
  8. Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity
  9. PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant

$2,714.86

Compare More
MIC-3328B1-D1E
3U CompactPCI PlusIO Intel® 3rd Generation Core™ Processor Blade
  1. Supports 3rd Generation Intel® Core™ processor with Intel® QM77 Platform Controller Hub
  2. 4 or 8 GB DDR3-1600 soldered SDRAM with ECC
  3. Triple independent display support
  4. Optional 8GB SATA NAND Flash on board
  5. 2.5" SATA-II SSD, CFast, XMC on 8HP version
  6. Two 10/100/1000 Mbps ports, 2 USB 3.0 ports, 1 VGA port on front panel (4HP)
  7. Two COM ports, 2 Display ports, 1 PS/2 port (8HP)
  8. Supports CompactPCI PlusIO
  9. PICMG2.0, R3.0 , PICMG2.1, R2.0, PICMG2.30 compliant

$2,300.25

Compare More
MIC-3328B1-D3E
3U CompactPCI PlusIO Intel® 3rd Generation Core™ Processor Blade
  1. Supports 3rd Generation Intel® Core™ processor with Intel® QM77 Platform Controller Hub
  2. 4 or 8 GB DDR3-1600 soldered SDRAM with ECC
  3. Triple independent display support
  4. Optional 8GB SATA NAND Flash on board
  5. 2.5" SATA-II SSD, CFast, XMC on 8HP version
  6. Two 10/100/1000 Mbps ports, 2 USB 3.0 ports, 1 VGA port on front panel (4HP)
  7. Two COM ports, 2 Display ports, 1 PS/2 port (8HP)
  8. Supports CompactPCI PlusIO
  9. PICMG2.0, R3.0 , PICMG2.1, R2.0, PICMG2.30 compliant

$1,976.82

Compare More
MIC-3329C1-D1E
3U CompactPCI Intel® Quad-Core Atom™ SoC Processor Blade
  1. Supports latest 22nm Intel® Atom™ Low power Quad Core E3845/Dual Core E3827 SoC processor
  2. Supports up to 4GB DDR3L-1333 soldered ECC memory
  3. Optional extension module on 8HP and RIO for VGA, LAN, USB, PS/2, Audio, COM ports
  4. Supports fanless application with optimized heatsink design
  5. Design to meet EN50121-4 and EN50155 for railway application
  6. PICMG2.0 R3.0, PICMG2.1 R.0 Compliant

$907.63

Compare More
MIC-3395IA-M8E
6U CompactPCI® 2nd and 3rd Generation Intel Core i3/i5/i7 Processor Blade with ECC Support
  1. Support 2nd and 3rd Generation Intel® Core™ i3/i5/i7 Processors and Intel QM67 PCH with embedded graphics (dual independent display)
  2. Up to 16 GB (DDR3 1066/1333/1600) ECC memory (max 8GB on-board socket SO-UDIMM x1, max 8GB)
  3. Optimized single-slot SBC with 2.5" SATA-III HDD/CFast socket
  4. Integrate on-board 2KB NVRAM and min. 8GB flash (optional)
  5. TPM
  6. Two SATA ports, four USB 2.0 ports, two DVI ports, two RS-232 ports, one PS/2 connector, and PCIe x4 interfaces to the Rear Transition Module (RTM)
  7. Six gigabit Ethernet ports for PICMG 2.16, front and rear connectivity
  8. PICMG 2.16 R1.0, PICMG 2.1 R2.0, PICMG 2.6 R1.0 compliant

$2,517.85

Compare More
Page 1 of 2
x
Contact Advantech