Contact Advantech Search Shopping list
  1.  
  2. inquiry.intercon@advantech.com.tw
  3. Login
Order By Part Number
Home Boards & Cards Motion Control

Motion Control

Advantech offers both centralized and distributed motion control solutions. DSP-based SoftMotion control cards offer a centralized approach utilizing simplified function calls executed by the DSP to accomplish complex motion algorithms. Advantech also offers distributed motion control through its proprietary motion control network, AMONet, (Advantech Motion Network) and through EtherCAT solutions. These include a variety of distributed I/O and smart motion control modules.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 4
PCI-1220U-AE
CIRCUIT BOARD, 2-axis Stepping/Pules-type Servo Motor Card
  1. Independent 2-axis motion control
  2. Hand wheel and jog function
  3. 2-axis linear interpolation function
  4. 2-axis circular interpolation function
  5. Continuous interpolation function
  6. Programmable T/S-curve acceleration/deceleration rate
  7. Up to 4 Mpps output for each axis
  8. Two pulse output types: CW/CCW or pulse/direction
  9. Up to 1 MHz encoder input for each axis
  10. Two encoder pulse input types: A/B phase or up/down
  11. Constant speed control
  12. Position management and software limit switch function
  13. BoardID™ switch

$444.21

Compare More
PCI-1243U-AE
4-axis Low Cost Stepping Motor Control Universal PCI Card
  1. 4 axis stepping motor control
  2. PCI universal bus
  3. Up to 400 k pulse output rate
  4. T-curve acceleration/deceleration
  5. Pulse/Dir and CW/CCW pulse output mode
  6. Up 24-bit step count
  7. Opto-Isolated Digital input and output
  8. Up to 1,500 Vrms system isolation
  9. BoardIDTM switch

$294.04

Compare More
PCI-1245-AE
Standard 4-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP
  6. Hardware emergency input
  7. Watchdog timer
  8. Position latch via ORG & index signal
  9. Position compare triggering up to 100 KHz, and memory buffer is up to 100 K points in DSP

$807.37

Compare More
PCI-1245L-AE
CIRCUIT BOARD, Basic 4-Axis SoftMotion Controller
  1. Encoder input is 4 MHz for 4xAB mode, 1 MHz for CW/CCW mode
  2. Pulse output up to 1 Mpps and the output type can be switched to differential or single-end by jumper setting
  3. Supports 2 axis linear interpolation
  4. Supports T/S-curve
  5. Supports speed override
  6. Hardware emergency input
  7. Watchdog timer

$288.38

Compare More
PCI-1265-AE
Standard 6-Axis DSP-Based SoftMotion Controller
  1. Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode
  2. Pulse output up to 5 Mpps
  3. Memory buffer (10K points) for trajectory planning which is designed in DSP
  4. Supports E-Gear, and helical interpolation
  5. Supports E-CAM providing 256 points to describe the CAM profiles which buffers located in DSP

$1,009.21

Compare More
PCI-1784U-AE
4-axis Quadrature Encoder and 4-ch Counter Universal PCI Card with 8-ch Isolated Digital I/O
  1. Four 32-bit up/down counters
  2. Single ended or differential inputs
  3. Pulse/direction and up/down counter
  4. x1, x2, x4 counts for each encoder cycle
  5. Optically isolated up to 2,500 VDC
  6. 4-stage digital filter with selectable sampling rate
  7. On-board 8-bit timer with wide range time-base selector
  8. Multiple interrupt sources for precision application
  9. 4 isolated digital input
  10. 4 isolated digital output
  11. BoardID™ switch

$321.62

Compare More
PCL-839+-AE
3-axis Stepping Motor Control ISA Card
  1. Independent, simultaneous control of three stepping motors
  2. Optically-isolated outputs
  3. Five isolated digital inputs per axis for limit switches
  4. Half-size PC add-on card
  5. Up to 200 kpps step rate
  6. 16 x DI/O

$448.33

Compare More
APAX-5080-AE
CIRCUIT MODULE, 4/8-ch High Speed Counter Module
  1. Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode
  2. 4 or 8 counter channels depends on operating modes
  3. 32-bit counter range with 1 bit overflow/underflow
  4. 1 MHz counter frequency
  5. 4 digital input channels with counter gate functionality
  6. 4 digital output channels with counter alarm output functionality
  7. Over voltage, short circuit and thermal protection design
  8. 2500 VDC isolation protection (between channels and backplane)

$180.33

Compare More
APAX-5580-474AE
CIRCUIT MODULE, PC-based Controller w/ Core i7 and 8G memory
  1. 4th Generation Intel® Core™ i7/i3/Celeron Processors up to 1.7 GHz with 4GB/8GB DDR3L Memory
  2. 2 x GbE, 4 x USB 2.0/3.0, 1 x RS-232 /422/485, 1 x VGA, Audio
  3. Dual power input and UPS support
  4. Compact with Fanless Design
  5. Supports Fieldbus Protocol by iDoor Technology
  6. 3G/GPS/GPRS/Wi-Fi Communication by mPCIe
  7. Chassis Grounding Protection
  8. LAN Redundancy (Teaming)
  9. Fault-Protected RS-485 Transceivers With Extended Common-Mode Range

$1,356.36

Compare More
Page 1 of 4