Contact Advantech Search Shopping list
  1. inquiry.intercon@advantech.com.tw
  2. Login

RS-485 I/O Modules

Advantech’s RS-485 I/O Modules, ADAM-4000 series, are the perfect choice for establishing a cost-effective remote I/O system. Customers can benefit from ADAM-4000 modules through its simple wiring using only two wires to communicate with their controller or other RS-485 devices. ADAM-4000 modules use the EIA RS-485 communication protocol; the industry's most widely used bi-directional, balanced transmission line suitable for industrial environments.
Results per page 91872 | Sort by Price Highest / Lowest
Page 1 of 1
ADAM-4017-D2E
8-ch Analog Input Module
  1. Channels: Six differential, two single-ended
  2. Input type: mV, V, mA
  3. Sampling rate: 10 samples/sec. (total)

$173.17

Compare More
ADAM-4024-B1E
4-ch Analog Output Module with Modbus
  1. 12-bit resolution
  2. Software configurable for mA or V output in individual channels
  3. 4 digital inputs for latch output
  4. 3000 VDC D/A to Logic isolation
  5. Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.

$258.99

Compare More
ADAM-4052-BE
8-ch Isolated Digital Input Module
  1. Six fully independent isolated channels.
  2. Two isolated channels with common ground
  3. Isolation voltage: 5000 V RMS

$99.19

Compare More
ADAM-4055-BE
16-ch Isolated Digital I/O Module with Modbus
  1. I/O type: 8 DO/DI
  2. Input Voltage level: 10~50 VDC
  3. Open Collector to 40 VDC
  4. Over voltage protection: 70 VDC
  5. 2,500 VDC optical isolation

$125.94

Compare More
ADAM-4510I-AE
Robust RS-422/485 Repeater
  1. Wide Operating Temperature: -40 ~ 85° C
  2. Automatic RS-485 data flow control
  3. 3000 VDC isolation protection
  4. Surge protection RS-485 data line
  5. Transmission speed up to 115.2 Kbps
  6. Networking up to 1200 meters (4000 feet)
  7. Reserved space for termination resistors
  8. Power and data flow indicator for troubleshooting
  9. Power requirement: +10 to +30 VDC w/power reversal protection
  10. Mounts easily on a DIN-rail, panel or piggyback

$170.82

Compare More
ADAM-4520I-AE
Robust RS-232 to RS-422/485 Converter
  1. Wide Operating Temperature: -40 ~ 85° C
  2. Automatic RS-485 data flow control
  3. 3000 VDC isolation protection
  4. Surge protection RS-485 data line
  5. Transmission speed up to 115.2 Kbps
  6. Networking up to 1200 meters (4000 feet)
  7. Reserved space for termination resistors
  8. Power and data flow indicator for troubleshooting
  9. Power requirement: +10 to +48 VDC
  10. Mounts easily on a DIN-rail, panel or piggyback

$121.22

Compare More
ADAM-4521-AE
Addressable RS-422/485 to RS-232 Converter
  1. Automatic RS-485 data flow control
  2. 1000 VDC isolation protection
  3. Surge protection RS-485 data line
  4. Transmission speed up to 115.2 Kbps
  5. Networking up to 1200 meters (4000 feet)
  6. Reserved space for termination resistors
  7. Power and data flow indicator for troubleshooting
  8. Power requirement: +10 to +30 VDC
  9. Mounts easily on a DIN-rail, panel or piggyback
  10. RS-232 and RS-485 can be set to different baud rates
  11. Watchdog timer function
  12. Software confi gurable to either addressable or non-addressable mode
  13. All communication setups stored in EEPROM

$181.83

Compare More
ADAM-4561-CE
CIRCUIT MODULE, 1-port Isolated USB to RS-232/422/485 Converter
  1. Full compliance with USB V1.1 specifications
  2. RS-232/422/485 port supported
  3. Transmission speed up to 115.2 kbps
  4. Isolation protection 3000 VDC provided
  5. Automatic RS-485 data flow control
  6. No external power supply necessary; the hub derives its power from the USB port
  7. Plug & Play installation
  8. No additional IRQs or I/O ports required
  9. Hot swap function supported

$132.70

Compare More
Page 1 of 1